Southwest Northwest infrared camera | infrared camera installation steps | infrared camera features infrared camera installation steps first step: to come up with a bracket, tools and parts: up plugs, screws, screwdriver, hammer, electric drills and other necessary tools ready; Press predetermined installation location, check the good of sizes up stopper and self-tapping screws, screw try bracket screw and cameras base is appropriate, the embedded interface the pipeline deal, the test cable is smooth, ready to enter the installation procedures. Step 2: Take out the cameras, models and specifications in accordance with pre-determined camera lens, carefully fitted lens (IR integrated camera without having to install the lens), be careful not to confirm fixed firmly touch the lens and CCD by hand after the power is turned on, connected host or on-site use of the monitor, small television sets adjust aperture focal length. Step 3: Take the bracket up plugs, screws, screwdriver, hammer, drill and other tools, according to a predetermined location, loaded bracket. Check firmly installed the camera in accordance with the agreed direction on; Step 4: If you need to install the shroud after the second step, directly from here to begin the installation shield. 1, open the cover and tailgate guard; 2, out of a fixed metal sheets, the camera is fixed; 3, the power adapter into the shroud; 4, reset on the cover and the tailgate, the rationale Shun cable, fixed onto the bracket. Step 5: welded video cable BNC plug socket insert video cable, confirm firmly fixed. Step Six: the power output of the power adapter plug into the power jack of the surveillance cameras, and confirmed firmness. Step Seven: the other end of the cable access control host or monitor (TV), to ensure that the firm. Step Eight: Turn on the monitoring host and the power of the camera through the monitor to adjust the camera angle to a predetermined range. Shenzhen Laocoon Electronics Co., Ltd. is a high-tech enterprise specialized in research, development, manufacturing, sales and closed-circuit surveillance products as a whole. Enterprises to continue research and development of high-end products to adapt to the needs of market development, and bring more convenience to customers and surprises. RS-0148M FEATURES: 2PCS IR LED IR Waterproof Camera ★ ★ 120 meters lattice; protection class: IP66 ★ 1/3 "SONY CCD, 480TV Lines; IR ON 0Lux ★ Built-CS lens ★ attractive appearance, all aluminum design cooling the excellent infrared camera parameters: Imaging Device: 1/3 "SONY CCD Sensing Area: 4.9mm (H) × 3.7mm (V) image pixels: PAL: 752 (H) x 582 (V) NTSC: 768 (H ) × 494 (V) TV system: PAL / NTSC Horizontal Resolution: 480TV Lines Minimum Illumination: IR ON 0 Lux signal-to-noise ratio: More than 48dB Auto Electronic Shutter: PAL: 1/50s-1/100 000s NTSC: 1 / 60s-1/100, 000s Gamma Correction: 0.45 Gain Control: Auto White Balance: Auto Backlight Compensation: Auto Synchronous System: Internal Synchronization Lens installation: Lens: C/CS12 to 25mm Video output: 1.0Vp-p, 75Ω, BNC Connector IR Distance: 120M Protection grade: IP66 infrared camera power supply: DC 12V Current: 150mA (IR ON MAX 1150mA) Operating Temperature: -10 ℃ ~ +50 ℃ Dimension: 250mm × 170mm × 125mm Weight: 1875g Material: Aluminum Alloy Contact : Shenzhen Laocoon Electronics Co., Ltd. Contact: Liu Kunhua Tel 0755 -27,865,266 Mobile Number: 18320895213 Toll-free :400-022-6828 Website: http://www.szjrse.com; http://www.jrse2012 . wjw Address: Shenzhen Baoan District 71 District Liuxian all the way on the 14th G third floor Southwest Northwest infrared camera | infrared camera installation steps infrared camera features