Advantages of array infrared camera | array camera package array camera 
 Third-generation IR LED array board with third-generation IR LED array, a special crystal growth process and package high photoelectric conversion efficiency of the chip is more than 2 times the ordinary array, heat, life is a traditional LED 5-10 times, the eyes of two years, the wife is almost impossible to not see the illumination attenuation, quality grade for the military level, simple, normal use is not bad. 
 Viewing distance, light uniformity, long life, small size, will be the CCD surveillance-oriented products. The single light night vision distance of 80 meters. Current design, the infrared light can work between 9-15V; Five reasons to choose the array camera (1) high brightness: single LED Array output is approximately 1W-20W, the brightness is about the output of the conventional single LED - the 15mW several times, so the product shot from far away. High efficiency: ordinary infrared LED electro-optical conversion efficiency of the public for about 10%, while the LED Array electro-optical conversion efficiency of 25%. (3) small size: LED Array is a highly integrated chip, under the same brightness index size is much smaller than other infrared products. (4) long life: LED Array life of 10000H, than the average LED life nine times higher for the 1200H, imagine: to pay about the same price for five to ten times the life of the product, who do not want to? Light absorbed: the half-power LED Array light 10 degrees -120 degrees (variable angle) of the emitting surface, the solution to a common LED night vision screen to form an intermediate is too bright on both sides of the dark "flashlight effect" the development of infrared cameras the process of comparison of the first generation 
 Array infrared camera RS-0158EF 
 Infrared distance of 120 meters 
 4PCS dot matrix LED; protection: IP66 
 1/3 "SONY CCD, 700TV Lines; IR ON 0Lux 
 Built-in CS mount lens 
 The appearance of fine, all-aluminum design, excellent heat 
 Technical parameters: 
 Imaging Device: 1/3 "SONY CCD 
 Sensing Area: 4.9mm (H) × 3.7mm (V) 
 Image pixels PAL: 500 (H) × 582 (V) NTSC: 510 (H) × 492 (V) 
 The infrared array camera TV system: PAL / NTSC 
 Horizontal Resolution: 700TV Lines 
 Minimum Illumination: 0.001Lux/F1.2 (B / W), 0Lux (IR ON) 
 Signal to noise ratio: More than 48dB 
 Auto Electronic Shutter: PAL: 1/50s-1/100, 000s NTSC: 1/60s-1/100, 000s 
 Gamma correction: 0.45 
 Gain Control: Auto 
 White Balance: Auto BLC: Auto 
 Synchronization System: Internal Synchronization 
 The lens mount: Lens: C/CS25mm 
 Video Output: 1.0Vp-p, 75Ω, BNC Connector 
 IR Distance: 120M 
 Of protection: IP66 
 Infrared array camera power supply: DC 12V ± 10% 
 Current: 70mA (IR ON the MAX 970mA) 
 Operating Temperature: -10 ° C to +50 ° C 
 Size: 180mm × 122mm × 107mm 
 Material: Aluminum alloy 
 Contact: Shenzhen City, South Electronics Co., Ltd. 
 Contact: Liu Kunhua 
 Tel :0755 -27,865,266 
 18320895213 
 Toll-free :400 -022-6828 
 Web site: www.szjrse.com 

 Address: 71 District of Bao'an District of Shenzhen City stay the fairy all the way on the 14th, Building G on the third floor 
 Advantages of array infrared camera | array camera package array camera